183 lines
8.0 KiB
VHDL
183 lines
8.0 KiB
VHDL
--
|
|
-- Global definitions for Red Pitaya PuzzleFW firmware.
|
|
--
|
|
-- Joris van Rantwijk 2024
|
|
--
|
|
|
|
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
|
|
package puzzlefw_pkg is
|
|
|
|
-- 32-bit address for DMA on AXI bus, aligned to 8-byte multiple.
|
|
subtype dma_address_type is std_logic_vector(31 downto 3);
|
|
type dma_address_array is array(natural range <>) of dma_address_type;
|
|
|
|
-- Burst length for DMA on AXI bus as number of beats minus 1.
|
|
subtype dma_burst_length_type is std_logic_vector(3 downto 0);
|
|
type dma_burst_length_array is array (natural range <>) of dma_burst_length_type;
|
|
|
|
-- 64-bit data for DMA on AXI bus.
|
|
subtype dma_data_type is std_logic_vector(63 downto 0);
|
|
type dma_data_array is array(natural range <>) of dma_data_type;
|
|
|
|
-- 14-bit ADC data.
|
|
constant adc_data_bits: integer := 14;
|
|
subtype adc_data_type is std_logic_vector(adc_data_bits - 1 downto 0);
|
|
type adc_data_array is array(natural range <>) of adc_data_type;
|
|
|
|
-- 24-bit averaged data.
|
|
constant sample_data_bits: integer := 24;
|
|
subtype sample_data_type is std_logic_vector(sample_data_bits - 1 downto 0);
|
|
type sample_data_array is array(natural range <>) of sample_data_type;
|
|
|
|
-- 48-bit timestamp.
|
|
constant timestamp_bits: integer := 48;
|
|
|
|
-- ADC input port type.
|
|
type adc_data_input_type is array(0 to 1) of std_logic_vector(15 downto 0);
|
|
|
|
-- Register addresses.
|
|
constant reg_addr_mask: std_logic_vector(31 downto 0) := x"0010fffc";
|
|
constant reg_info: natural := 16#000000#;
|
|
constant reg_irq_enable: natural := 16#000010#;
|
|
constant reg_irq_pending: natural := 16#000014#;
|
|
constant reg_dma_en: natural := 16#000100#;
|
|
constant reg_dma_status: natural := 16#000104#;
|
|
constant reg_dma_clear: natural := 16#000108#;
|
|
constant reg_timestamp_lo: natural := 16#000180#;
|
|
constant reg_timestamp_hi: natural := 16#000184#;
|
|
constant reg_timestamp_clear: natural := 16#000188#;
|
|
constant reg_acq_addr_start: natural := 16#000200#;
|
|
constant reg_acq_addr_end: natural := 16#000204#;
|
|
constant reg_acq_addr_limit: natural := 16#000208#;
|
|
constant reg_acq_addr_intr: natural := 16#00020c#;
|
|
constant reg_acq_addr_ptr: natural := 16#000210#;
|
|
constant reg_acq_dma_ctrl: natural := 16#000214#;
|
|
constant reg_acq_intr_ctrl: natural := 16#000218#;
|
|
constant reg_acq_dma_status: natural := 16#00021c#;
|
|
constant reg_acquisition_en: natural := 16#000220#;
|
|
constant reg_record_length: natural := 16#000224#;
|
|
constant reg_decimation_factor: natural := 16#000228#;
|
|
constant reg_shift_steps: natural := 16#00022c#;
|
|
constant reg_averaging_en: natural := 16#000230#;
|
|
constant reg_ch4_mode: natural := 16#000234#;
|
|
constant reg_simulate_adc: natural := 16#000238#;
|
|
constant reg_trigger_mode: natural := 16#000240#;
|
|
constant reg_trigger_delay: natural := 16#000244#;
|
|
constant reg_trigger_status: natural := 16#000248#;
|
|
constant reg_adc_sample: natural := 16#000280#;
|
|
constant reg_adc23_sample: natural := 16#000284#;
|
|
constant reg_adc_range_clear: natural := 16#00028c#;
|
|
constant reg_adc0_minmax: natural := 16#000290#;
|
|
constant reg_adc1_minmax: natural := 16#000294#;
|
|
constant reg_adc2_minmax: natural := 16#000298#;
|
|
constant reg_adc3_minmax: natural := 16#00029c#;
|
|
constant reg_test_led: natural := 16#000404#;
|
|
constant reg_test_divider: natural := 16#000408#;
|
|
constant reg_dma_buf_addr: natural := 16#100000#;
|
|
constant reg_dma_buf_size: natural := 16#100004#;
|
|
|
|
-- Firmware info word.
|
|
constant fw_api_version: natural := 1;
|
|
constant fw_version_major: natural := 0;
|
|
constant fw_version_minor: natural := 4;
|
|
constant fw_info_word: std_logic_vector(31 downto 0) :=
|
|
x"4a"
|
|
& std_logic_vector(to_unsigned(fw_api_version, 8))
|
|
& std_logic_vector(to_unsigned(fw_version_major, 8))
|
|
& std_logic_vector(to_unsigned(fw_version_minor, 8));
|
|
|
|
-- Data stream.
|
|
constant msg_adc_data: std_logic_vector(7 downto 0) := x"01";
|
|
constant msg_trigger: std_logic_vector(7 downto 0) := x"02";
|
|
constant msg_overflow: std_logic_vector(7 downto 0) := x"10";
|
|
|
|
-- Control registers: read/write access by processor, output signals to FPGA.
|
|
type registers_control is record
|
|
irq_enable: std_logic;
|
|
test_led: std_logic_vector(7 downto 0);
|
|
test_divider: std_logic_vector(15 downto 0);
|
|
dma_en: std_logic;
|
|
dma_clear: std_logic; -- single cycle
|
|
timestamp_clear: std_logic; -- single cycle
|
|
acq_addr_start: std_logic_vector(31 downto 7);
|
|
acq_addr_end: std_logic_vector(31 downto 7);
|
|
acq_addr_limit: std_logic_vector(31 downto 7);
|
|
acq_addr_intr: std_logic_vector(31 downto 3);
|
|
acq_dma_en: std_logic;
|
|
acq_dma_init: std_logic; -- single cycle
|
|
acq_intr_en: std_logic;
|
|
acq_intr_clear: std_logic; -- single cycle
|
|
acquisition_en: std_logic;
|
|
record_length: std_logic_vector(15 downto 0);
|
|
decimation_factor: std_logic_vector(17 downto 0);
|
|
shift_steps: std_logic_vector(3 downto 0);
|
|
averaging_en: std_logic;
|
|
ch4_mode: std_logic;
|
|
simulate_adc: std_logic;
|
|
trig_auto_en: std_logic;
|
|
trig_ext_en: std_logic;
|
|
trig_force: std_logic; -- single cycle
|
|
trig_ext_select: std_logic_vector(1 downto 0);
|
|
trig_ext_falling: std_logic;
|
|
trigger_delay: std_logic_vector(15 downto 0);
|
|
adc_range_clear: std_logic;
|
|
dma_buf_addr: std_logic_vector(31 downto 12);
|
|
dma_buf_size: std_logic_vector(31 downto 12);
|
|
end record;
|
|
|
|
-- Status registers: input signals from FPGA, read-only access by processor.
|
|
type registers_status is record
|
|
irq_pending: std_logic_vector(0 downto 0);
|
|
dma_busy: std_logic;
|
|
dma_err_read: std_logic;
|
|
dma_err_write: std_logic;
|
|
dma_err_address: std_logic;
|
|
dma_err_any: std_logic;
|
|
timestamp: std_logic_vector(timestamp_bits - 1 downto 0);
|
|
acq_addr_ptr: std_logic_vector(31 downto 3);
|
|
acq_dma_busy: std_logic;
|
|
trig_waiting: std_logic;
|
|
adc_sample: adc_data_array(0 to 3);
|
|
adc_min_value: adc_data_array(0 to 3);
|
|
adc_max_value: adc_data_array(0 to 3);
|
|
end record;
|
|
|
|
constant registers_control_init: registers_control := (
|
|
irq_enable => '0',
|
|
test_led => (others => '0'),
|
|
test_divider => (others => '0'),
|
|
dma_en => '0',
|
|
dma_clear => '0',
|
|
timestamp_clear => '0',
|
|
acq_addr_start => (others => '0'),
|
|
acq_addr_end => (others => '0'),
|
|
acq_addr_limit => (others => '0'),
|
|
acq_addr_intr => (others => '0'),
|
|
acq_dma_en => '0',
|
|
acq_dma_init => '0',
|
|
acq_intr_en => '0',
|
|
acq_intr_clear => '0',
|
|
acquisition_en => '0',
|
|
record_length => (others => '0'),
|
|
decimation_factor => (others => '0'),
|
|
shift_steps => (others => '0'),
|
|
averaging_en => '0',
|
|
ch4_mode => '0',
|
|
simulate_adc => '0',
|
|
trig_auto_en => '0',
|
|
trig_ext_en => '0',
|
|
trig_force => '0',
|
|
trig_ext_select => (others => '0'),
|
|
trig_ext_falling => '0',
|
|
trigger_delay => (others => '0'),
|
|
adc_range_clear => '0',
|
|
dma_buf_addr => (others => '0'),
|
|
dma_buf_size => (others => '0')
|
|
);
|
|
|
|
end package;
|