86 lines
2.7 KiB
Tcl
86 lines
2.7 KiB
Tcl
#
|
|
# TCL script to build PuzzleFW firmware image in non-project mode.
|
|
#
|
|
# Usage:
|
|
# vivado -mode batch -source nonproject.tcl
|
|
#
|
|
|
|
# Specify FPGA type.
|
|
# This is used by "synth_design".
|
|
set_part xc7z010clg400-1
|
|
|
|
# Specify board type.
|
|
# Unclear whether this is required.
|
|
set_property board_part redpitaya.com:redpitaya:part0:1.1 [current_project]
|
|
|
|
# Specify HDL language.
|
|
# This determines the language of the HDL wrapper for the block design.
|
|
set_property target_language VHDL [current_project]
|
|
|
|
# Load VHDL files.
|
|
read_vhdl -vhdl2008 ../rtl/puzzlefw_pkg.vhd
|
|
read_vhdl -vhdl2008 ../rtl/acquisition_chain.vhd
|
|
read_vhdl -vhdl2008 ../rtl/acquisition_manager.vhd
|
|
read_vhdl -vhdl2008 ../rtl/acquisition_stream.vhd
|
|
read_vhdl -vhdl2008 ../rtl/adc_capture.vhd
|
|
read_vhdl -vhdl2008 ../rtl/adc_range_monitor.vhd
|
|
read_vhdl -vhdl2008 ../rtl/adc_sample_stream.vhd
|
|
read_vhdl -vhdl2008 ../rtl/dma_axi_master.vhd
|
|
read_vhdl -vhdl2008 ../rtl/dma_write_channel.vhd
|
|
read_vhdl -vhdl2008 ../rtl/registers.vhd
|
|
read_vhdl -vhdl2008 ../rtl/sample_decimation.vhd
|
|
read_vhdl -vhdl2008 ../rtl/shift_engine.vhd
|
|
read_vhdl -vhdl2008 ../rtl/simple_fifo.vhd
|
|
read_vhdl -vhdl2008 ../rtl/timestamp_gen.vhd
|
|
read_vhdl -vhdl2008 ../rtl/trigger_detector.vhd
|
|
read_vhdl -vhdl2008 ../rtl/puzzlefw_top.vhd
|
|
|
|
# Load Zynq block design.
|
|
#
|
|
# Note: The attribute "synth_flow_mode" in the block design file
|
|
# MUST be set to "None". The default value is "Hierarchical", but that
|
|
# causes problems with synthesis of the IP cores used in the block design.
|
|
#
|
|
# Note: The attribute "gen_directory" in the block design file
|
|
# determines the location of output produced by "generate_target".
|
|
# It must be set to a relative path within the project directory.
|
|
#
|
|
read_bd redpitaya_puzzlefw.srcs/sources_1/bd/puzzlefw/puzzlefw.bd
|
|
set_property synth_checkpoint_mode none [get_files puzzlefw.bd]
|
|
generate_target all [get_files puzzlefw.bd]
|
|
|
|
# Load generated HDL wrapper for block design.
|
|
read_vhdl redpitaya_puzzlefw.gen/sources_1/bd/puzzlefw/hdl/puzzlefw_wrapper.vhd
|
|
|
|
# Load constraints.
|
|
read_xdc ../constraints/red_pitaya.xdc
|
|
|
|
# Run synthesis and implementation.
|
|
|
|
file mkdir output
|
|
|
|
synth_design -top puzzlefw_top
|
|
report_utilization -file output/post_synth_utilization.rpt
|
|
|
|
opt_design
|
|
place_design
|
|
report_io -file output/post_place_io.rpt
|
|
|
|
phys_opt_design
|
|
route_design
|
|
write_checkpoint -force output/post_route.dcp
|
|
|
|
report_drc -file output/post_route_drc.rpt
|
|
report_utilization -file output/post_route_utilization.rpt
|
|
report_timing_summary -file output/post_route_timing.rpt
|
|
report_power -file output/post_route_power.rpt
|
|
|
|
# Write .bit file.
|
|
write_bitstream -force output/puzzlefw_top.bit
|
|
|
|
# Export XSA file.
|
|
# This MUST be done via a checkpoint file.
|
|
open_checkpoint output/post_route.dcp
|
|
write_hw_platform -fixed -force -file output/redpitaya_puzzlefw.xsa
|
|
|