Rework U-Boot config and devicetree
This commit is contained in:
parent
2c23fa705d
commit
84e6e9ef39
|
|
@ -2,16 +2,14 @@
|
|||
|
||||
set -e
|
||||
|
||||
BUILDDIR="$(realpath buildroot/output/host/bin)"
|
||||
. script_env
|
||||
setup_toolchain
|
||||
|
||||
if [ ! -x "$BUILDDIR/arm-linux-gcc" ]; then
|
||||
echo "ERROR: Missing $BUILDDIR/arm-linux-gcc" >&2
|
||||
echo " Build buildroot to prepare the arm-linux toolchain" >&2
|
||||
exit 1
|
||||
fi
|
||||
make -C "$UBOOT_DIR" CROSS_COMPILE=arm-linux- distclean
|
||||
|
||||
export PATH="$BUILDDIR:$PATH"
|
||||
cp -a devicetree/redpitaya_puzzlefw_uboot.dts "$UBOOT_DIR/arch/arm/dts/redpitaya.dts"
|
||||
cp -a config/uboot_redpitaya_puzzlefw_defconfig "$UBOOT_DIR/.config"
|
||||
|
||||
make -C "$UBOOT_DIR" CROSS_COMPILE=arm-linux- olddefconfig
|
||||
make -C "$UBOOT_DIR" CROSS_COMPILE=arm-linux-
|
||||
|
||||
make -C u-boot CROSS_COMPILE=arm-linux- distclean
|
||||
make -C u-boot CROSS_COMPILE=arm-linux- xilinx_zynq_virt_config
|
||||
make -C u-boot CROSS_COMPILE=arm-linux-
|
||||
|
|
|
|||
|
|
@ -0,0 +1,147 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_SPL_SYS_DCACHE_OFF=y
|
||||
CONFIG_SYS_L2CACHE_OFF=y
|
||||
CONFIG_ARCH_ZYNQ=y
|
||||
CONFIG_TEXT_BASE=0x4000000
|
||||
CONFIG_SF_DEFAULT_SPEED=30000000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="redpitaya"
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x200000
|
||||
CONFIG_SPL_STACK=0xfffffe00
|
||||
CONFIG_SPL=y
|
||||
CONFIG_CMD_FRU=y
|
||||
CONFIG_CMD_ZYNQ_AES=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x0
|
||||
CONFIG_SYS_MEMTEST_START=0x00000000
|
||||
CONFIG_SYS_MEMTEST_END=0x00001000
|
||||
CONFIG_REMAKE_ELF=y
|
||||
CONFIG_SYS_CUSTOM_LDSCRIPT=y
|
||||
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_SIGNATURE=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_FIT_PRINT=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_CLOCKS=y
|
||||
CONFIG_SPL_MAX_SIZE=0x30000
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x100000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x100000
|
||||
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SYS_SPL_MALLOC=y
|
||||
CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000
|
||||
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
|
||||
CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb"
|
||||
CONFIG_SPL_FPGA=y
|
||||
CONFIG_SPL_OS_BOOT=y
|
||||
CONFIG_SYS_SPL_ARGS_ADDR=0x10000000
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
|
||||
CONFIG_SYS_MAXARGS=32
|
||||
CONFIG_SYS_PBSIZE=2071
|
||||
# CONFIG_BOOTM_NETBSD is not set
|
||||
CONFIG_SYS_BOOTM_LEN=0x3c00000
|
||||
CONFIG_CMD_IMLS=y
|
||||
CONFIG_CMD_THOR_DOWNLOAD=y
|
||||
CONFIG_THOR_RESET_OFF=y
|
||||
CONFIG_CMD_GREPENV=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_SYS_ALT_MEMTEST=y
|
||||
CONFIG_CMD_DFU=y
|
||||
CONFIG_CMD_FPGA_LOADBP=y
|
||||
CONFIG_CMD_FPGA_LOADFS=y
|
||||
CONFIG_CMD_FPGA_LOADMK=y
|
||||
CONFIG_CMD_FPGA_LOADP=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_MTD=y
|
||||
CONFIG_CMD_NAND_LOCK_UNLOCK=y
|
||||
CONFIG_CMD_SF_TEST=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_BOOTP_MAY_FAIL=y
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_EFIDEBUG=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_TIMER=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_SQUASHFS=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_CMD_MTDPARTS_SPREAD=y
|
||||
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
|
||||
CONFIG_CMD_UBI=y
|
||||
CONFIG_OF_BOARD=y
|
||||
CONFIG_OF_LIST="zynq-zc702 zynq-zc706 zynq-zc770-xm010 zynq-zc770-xm011 zynq-zc770-xm011-x16 zynq-zc770-xm012 zynq-zc770-xm013 zynq-cc108 zynq-microzed zynq-minized zynq-picozed zynq-zed zynq-zturn zynq-zturn-v5 zynq-zybo zynq-zybo-z7 zynq-dlc20-rev1.0 redpitaya"
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_NETCONSOLE=y
|
||||
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_DFU_TIMEOUT=y
|
||||
CONFIG_DFU_MMC=y
|
||||
CONFIG_DFU_RAM=y
|
||||
CONFIG_DFU_SF=y
|
||||
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x600000
|
||||
CONFIG_FPGA_XILINX=y
|
||||
CONFIG_FPGA_ZYNQPL=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_CADENCE=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_I2C_EEPROM=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ZYNQ=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_NOR_FLASH=y
|
||||
CONFIG_FLASH_SHOW_PROGRESS=10
|
||||
CONFIG_CFI_FLASH=y
|
||||
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
||||
CONFIG_SYS_FLASH_CFI=y
|
||||
CONFIG_SYS_FLASH_QUIET_TEST=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_NAND_ZYNQ=y
|
||||
CONFIG_SYS_NAND_ONFI_DETECTION=y
|
||||
CONFIG_SPI_FLASH_GIGADEVICE=y
|
||||
CONFIG_SPI_FLASH_ISSI=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_SST=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_PHY_MARVELL=y
|
||||
CONFIG_PHY_MICREL=y
|
||||
CONFIG_PHY_MICREL_KSZ90X1=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_PHY_XILINX=y
|
||||
CONFIG_DM_ETH_PHY=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_ZYNQ_GEM=y
|
||||
CONFIG_ARM_DCC=y
|
||||
CONFIG_ZYNQ_SERIAL=y
|
||||
CONFIG_ZYNQ_SPI=y
|
||||
CONFIG_ZYNQ_QSPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_ULPI_VIEWPORT=y
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
|
||||
CONFIG_CI_UDC=y
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_USB_FUNCTION_THOR=y
|
||||
CONFIG_SYS_TIMER_COUNTS_DOWN=y
|
||||
CONFIG_SPL_GZIP=y
|
||||
CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
|
||||
CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
|
||||
CONFIG_TOOLS_MKEFICAPSULE=y
|
||||
|
|
@ -0,0 +1,92 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include "zynq-7000.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RedPitaya PuzzleFW";
|
||||
compatible = "xlnx,zynq-7000";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gem0;
|
||||
i2c0 = &i2c0;
|
||||
serial0 = &uart0;
|
||||
mmc0 = &sdhci0;
|
||||
nvmem0 = &eeprom;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x20000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&clkc {
|
||||
ps-clk-frequency = <33333333>;
|
||||
};
|
||||
|
||||
&gem0 {
|
||||
status = "okay";
|
||||
xlnx,ptp-enet-clock = <0x69f6bcb>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <ðernet_phy>;
|
||||
|
||||
ethernet_phy: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
emio-gpio-width = <24>;
|
||||
gpio-mask-high = <0x0>;
|
||||
gpio-mask-low = <0x5600>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "24c64";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
&qspi {
|
||||
bootph-all;
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
flash@0 {
|
||||
compatible = "n25q128a11", "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
bootph-all;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
device_type = "serial";
|
||||
cts-override;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
device_type = "serial";
|
||||
cts-override;
|
||||
};
|
||||
|
||||
|
|
@ -16,3 +16,12 @@ LINUX_DIR="$LINUX_VERSION"
|
|||
|
||||
BOOTIMG_DIR="boot_img"
|
||||
SDCARD_DIR="sdcard_files"
|
||||
|
||||
setup_toolchain () {
|
||||
if [ ! -x "$TOOLCHAIN_DIR/arm-linux-gcc" ]; then
|
||||
echo "ERROR: Missing $TOOLCHAIN_DIR/arm-linux-gcc" >&2
|
||||
echo " Build buildroot to prepare the arm-linux toolchain" >&2
|
||||
exit 1
|
||||
fi
|
||||
export PATH="$TOOLCHAIN_DIR:$PATH"
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue