Add missing build script for 4-channel FPGA

fpga/vivado/nonproject_4ch.tcl

@@ -0,0 +1,91 @@
+#
+# TCL script to build PuzzleFW firmware image
+# for Red Pitaya 4-inputimage in non-project mode.
+#
+# Usage:
+#   vivado -mode batch -source nonproject_4ch.tcl
+#
+
+# Specify FPGA type.
+# This is used by "synth_design".
+set_part xc7z020clg400-1
+
+## Specify path to RedPitaya board definition.
+## Unclear whether this is required.
+#set_param board.repoPaths [list "RedPitaya-FPGA/brd"]
+
+# Specify HDL language.
+# This determines the language of the HDL wrapper for the block design.
+set_property target_language VHDL [current_project]
+
+# Load VHDL files.
+read_vhdl -vhdl2008 ../rtl/puzzlefw_pkg.vhd
+read_vhdl -vhdl2008 ../rtl/acquisition_chain.vhd
+read_vhdl -vhdl2008 ../rtl/acquisition_manager.vhd
+read_vhdl -vhdl2008 ../rtl/acquisition_stream.vhd
+read_vhdl -vhdl2008 ../rtl/adc_capture_ddr.vhd
+read_vhdl -vhdl2008 ../rtl/adc_range_monitor.vhd
+read_vhdl -vhdl2008 ../rtl/adc_sample_stream.vhd
+read_vhdl -vhdl2008 ../rtl/deglitch.vhd
+read_vhdl -vhdl2008 ../rtl/dma_axi_master.vhd
+read_vhdl -vhdl2008 ../rtl/dma_write_channel.vhd
+read_vhdl -vhdl2008 ../rtl/registers.vhd
+read_vhdl -vhdl2008 ../rtl/sample_decimation.vhd
+read_vhdl -vhdl2008 ../rtl/shift_engine.vhd
+read_vhdl -vhdl2008 ../rtl/ffpair.vhd
+read_vhdl -vhdl2008 ../rtl/simple_fifo.vhd
+read_vhdl -vhdl2008 ../rtl/timestamp_gen.vhd
+read_vhdl -vhdl2008 ../rtl/timetagger.vhd
+read_vhdl -vhdl2008 ../rtl/trigger_detector.vhd
+read_vhdl -vhdl2008 ../rtl/puzzlefw_top_4ch.vhd
+
+# Load Zynq block design.
+#
+# Note: The attribute "synth_flow_mode" in the block design file
+# MUST be set to "None". The default value is "Hierarchical", but that
+# causes problems with synthesis of the IP cores used in the block design.
+#
+# Note: The attribute "gen_directory" in the block design file
+# determines the location of output produced by "generate_target".
+# It must be set to a relative path within the project directory.
+#
+read_bd redpitaya_puzzlefw.srcs/sources_1/bd/puzzlefw/puzzlefw.bd
+set_property synth_checkpoint_mode none [get_files puzzlefw.bd]
+generate_target all [get_files puzzlefw.bd]
+
+# Load generated HDL wrapper for block design.
+read_vhdl redpitaya_puzzlefw.gen/sources_1/bd/puzzlefw/hdl/puzzlefw_wrapper.vhd
+
+# Load constraints.
+read_xdc ../constraints/red_pitaya_4ch.xdc
+
+# Run synthesis and implementation.
+
+set outdir output_4ch
+file mkdir $outdir
+
+synth_design -top puzzlefw_top_4ch
+report_utilization -file $outdir/post_synth_utilization.rpt
+
+opt_design
+place_design
+report_io -file $outdir/post_place_io.rpt
+
+phys_opt_design
+route_design
+write_checkpoint -force $outdir/post_route.dcp
+
+report_drc -file $outdir/post_route_drc.rpt
+report_utilization -file $outdir/post_route_utilization.rpt
+report_timing_summary -file $outdir/post_route_timing.rpt
+report_power -file $outdir/post_route_power.rpt
+report_datasheet -file $outdir/post_route_datasheet.rpt
+
+# Write .bit file.
+write_bitstream -force $outdir/puzzlefw_top_4ch.bit
+
+# Export XSA file.
+# This MUST be done via a checkpoint file.
+open_checkpoint $outdir/post_route.dcp
+write_hw_platform -fixed -force -file $outdir/redpitaya_puzzlefw_4ch.xsa
+