Add Vivado non-project build script

fpga/vivado/nonproject.tcl

@@ -0,0 +1,73 @@
+#
+# TCL script to build PuzzleFW firmware image in non-project mode.
+#
+# Usage:
+#   vivado -mode batch -source nonproject.tcl
+#
+
+# Specify FPGA type.
+# This is used by "synth_design".
+set_part xc7z010clg400-1
+
+# Specify board type.
+# Unclear whether this is required.
+set_property board_part redpitaya.com:redpitaya:part0:1.1 [current_project]
+
+# Specify HDL language.
+# This determines the language of the HDL wrapper for the block design.
+set_property target_language VHDL [current_project]
+
+# Load VHDL files.
+read_vhdl -vhdl2008 ../rtl/puzzlefw_pkg.vhd
+read_vhdl -vhdl2008 ../rtl/dma_axi_master.vhd
+read_vhdl -vhdl2008 ../rtl/registers.vhd
+read_vhdl -vhdl2008 ../rtl/puzzlefw_top.vhd
+
+# Load Zynq block design.
+#
+# Note: The attribute "synth_flow_mode" in the block design file
+# MUST be set to "None". The default value is "Hierarchical", but that
+# causes problems with synthesis of the IP cores used in the block design.
+#
+# Note: The attribute "gen_directory" in the block design file
+# determines the location of output produced by "generate_target".
+# It must be set to a relative path within the project directory.
+#
+read_bd redpitaya_puzzlefw.srcs/sources_1/bd/puzzlefw/puzzlefw.bd
+set_property synth_checkpoint_mode none [get_files puzzlefw.bd]
+generate_target all [get_files puzzlefw.bd]
+
+# Load generated HDL wrapper for block design.
+read_vhdl redpitaya_puzzlefw.gen/sources_1/bd/puzzlefw/hdl/puzzlefw_wrapper.vhd
+
+# Load constraints.
+read_xdc ../constraints/red_pitaya.xdc
+
+# Run synthesis and implementation.
+
+file mkdir output
+
+synth_design -top puzzlefw_top
+report_utilization -file output/post_synth_utilization.rpt
+
+opt_design
+place_design
+report_io -file output/post_place_io.rpt
+
+phys_opt_design
+route_design
+write_checkpoint -force output/post_route.dcp
+
+report_drc -file output/post_route_drc.rpt
+report_utilization -file output/post_route_utilization.rpt
+report_timing_summary -file output/post_route_timing.rpt
+report_power -file output/post_route_power.rpt
+
+# Write .bit file.
+write_bitstream -force output/puzzlefw_top.bit
+
+# Export XSA file.
+# This MUST be done via a checkpoint file.
+open_checkpoint output/post_route.dcp
+write_hw_platform -fixed -force -file output/redpitaya_puzzlefw.xsa
+