joris

SMA adapter for FPGA boards

Go to file

Joris van Rantwijk 11b895b2e5 Testje		2024-03-07 22:28:14 +01:00
sma2_plug_v2	Fix URL in manual	2024-03-07 22:20:31 +01:00
LICENSE.txt	Add README and license	2020-05-31 16:27:12 +02:00
README.md	Move repository to Gitea	2024-03-07 22:10:07 +01:00
testje	Testje	2024-03-07 22:28:14 +01:00

README.md

SMA2 Plug v2

The SMA2 Plug is a small printed circuit board (PCB) which can be used as an extension module to attach coaxial cables to an FPGA board.

One side of the module has two SMA connectors which can be used either as digital input or as digital output at TTL level. The other side of the module has a 2x6 pin header for plugging into an FPGA board, compatible with the Digilent Pmod specification.

For more details, see the user manual
https://git.jorisvr.nl/joris/hw-sma-plug/src/branch/master/sma2_plug_v2/doc/manual.pdf

The SMA2 Plug is an open hardware design. This repository contains the complete KiCad design files and design documents for the module.

Acknowledgements

Many thanks to Sidney Cadot for fundamental ideas about features and use cases for this module and detailed discussions on the design.

Many thanks to Joris van Zwieten for reviewing the design and for invaluable advice on SMD soldering.

License

This design documentation describes Open Hardware and is licensed under the CERN-OHL-S v2.

You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-S v2 (https://cern.ch/cern-ohl).

This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions.