51 lines
1.5 KiB
Plaintext
51 lines
1.5 KiB
Plaintext
|
|
SMA2 Plug v2
|
|
============
|
|
|
|
The SMA2 Plug is a small printed circuit board (PCB) which can
|
|
be used as an extension module to attach coaxial cables to
|
|
an FPGA board.
|
|
|
|
One side of the module has two SMA connectors which can be used
|
|
either as digital input or as digital output at TTL level.
|
|
The other side of the module has a 2x6 pin header for plugging
|
|
into an FPGA board, compatible with the Digilent Pmod specification.
|
|
|
|
For more details, see the user manual
|
|
https://github.com/jorisvr/hw-sma-plug/blob/master/sma2_plug_v2/doc/manual.pdf
|
|
|
|
The SMA2 Plug is an open hardware design. This repository contains
|
|
the complete KiCad design files and design documents for the module.
|
|
|
|
|
|
Acknowledgements
|
|
----------------
|
|
|
|
Many thanks to Sidney Cadot for fundamental ideas about features
|
|
and use cases for this module and detailed discussions on the design.
|
|
|
|
Many thanks to Joris van Zwieten for reviewing the design and
|
|
for invaluable advice on SMD soldering.
|
|
|
|
|
|
License
|
|
-------
|
|
|
|
Copyright 2020 Joris van Rantwijk
|
|
|
|
This design documentation describes Open Hardware and is licensed
|
|
under the CERN-OHL-S v2.
|
|
|
|
You may redistribute and modify this documentation and make products
|
|
using it under the terms of the CERN-OHL-S v2
|
|
(https://cern.ch/cern-ohl).
|
|
|
|
This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED
|
|
WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND
|
|
FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2
|
|
for applicable conditions.
|
|
|
|
Source location: https://github.com/jorisvr/hw-sma-plug
|
|
|
|
--
|