Fix analysis errors in test_sincos_serial.vhdl.

This commit is contained in:
Joris van Rantwijk 2016-04-21 00:43:35 +02:00
parent b21a696b71
commit 84c92fea95
1 changed files with 26 additions and 26 deletions

View File

@ -53,9 +53,9 @@ architecture rtl of test_sincos_serial is
signal s_gen2_out_cos: signed(23 downto 0);
signal r_tst_start: std_logic;
signal r_tst_in_phase: unsigned(31 downto 0);
signal r_tst_out_sin: unsigned(31 downto 0);
signal r_tst_out_cos: unsigned(31 downto 0);
signal r_tst_in_phase: std_logic_vector(31 downto 0);
signal r_tst_out_sin: std_logic_vector(31 downto 0);
signal r_tst_out_cos: std_logic_vector(31 downto 0);
signal r_tst_busy: std_logic;
signal r_tst_cyclecnt: unsigned(3 downto 0);
@ -71,7 +71,7 @@ architecture rtl of test_sincos_serial is
signal r_ser_rx_bit: std_logic;
signal r_ser_rx_timer: unsigned(12 downto 0);
signal r_ser_rx_timeout: std_logic;
signal r_ser_rx_state; std_logic_vector(1 downto 0);
signal r_ser_rx_state: std_logic_vector(1 downto 0);
signal r_ser_rx_shift: std_logic_vector(8 downto 0);
signal r_ser_tx_strobe: std_logic;
@ -130,13 +130,13 @@ begin
if r_tst_busy = '1' and r_tst_cyclecnt = latency then
r_tst_busy <= '0';
r_tst_out_sin <= s_out_sin;
r_tst_out_cos <= s_out_cos;
r_tst_out_sin <= std_logic_vector(s_out_sin);
r_tst_out_cos <= std_logic_vector(s_out_cos);
end if;
if r_tst_start = '1' and r_tst_busy = '0' then
r_tst_busy <= '1';
r_in_phase <= r_tst_in_phase;
r_in_phase <= unsigned(r_tst_in_phase);
r_tst_cyclecnt <= (others => '0');
end if;
@ -210,22 +210,22 @@ begin
if r_ctl_state = "0010" and r_ser_rx_strobe = '1' then
r_ctl_state <= "0011";
r_tst_in_phase <= unsigned(r_ser_rx_byte) & r_tst_in_phase(31 downto 8);
r_tst_in_phase <= r_ser_rx_byte & r_tst_in_phase(31 downto 8);
end if;
if r_ctl_state = "0011" and r_ser_rx_strobe = '1' then
r_ctl_state <= "0100";
r_tst_in_phase <= unsigned(r_ser_rx_byte) & r_tst_in_phase(31 downto 8);
r_tst_in_phase <= r_ser_rx_byte & r_tst_in_phase(31 downto 8);
end if;
if r_ctl_state = "0100" and r_ser_rx_strobe = '1' then
r_ctl_state <= "0101";
r_tst_in_phase <= unsigned(r_ser_rx_byte) & r_tst_in_phase(31 downto 8);
r_tst_in_phase <= r_ser_rx_byte & r_tst_in_phase(31 downto 8);
end if;
if r_ctl_state = "0101" and r_ser_rx_strobe = '1' then
r_ctl_state <= "0110";
r_tst_in_phase <= unsigned(r_ser_rx_byte) & r_tst_in_phase(31 downto 8);
r_tst_in_phase <= r_ser_rx_byte & r_tst_in_phase(31 downto 8);
r_tst_start <= '1';
end if;
@ -235,49 +235,49 @@ begin
if r_ctl_state = "0111" and r_ser_tx_busy = '0' then
r_ctl_state <= "1000";
r_ser_tx_byte <= std_logic_vector(r_tst_out_sin(7 downto 0))
r_ser_tx_byte <= r_tst_out_sin(7 downto 0);
r_ser_tx_strobe <= '1';
end if;
if r_ctl_state = "1000" and r_ser_tx_strobe = '0' and r_ser_tx_busy = '0' then
r_ctl_state <= "1001";
r_ser_tx_byte <= std_logic_vector(r_tst_out_sin(15 downto 8))
r_ser_tx_byte <= r_tst_out_sin(15 downto 8);
r_ser_tx_strobe <= '1';
end if;
if r_ctl_state = "1001" and r_ser_tx_strobe = '0' and r_ser_tx_busy = '0' then
r_ctl_state <= "1010";
r_ser_tx_byte <= std_logic_vector(r_tst_out_sin(23 downto 15))
r_ser_tx_byte <= r_tst_out_sin(23 downto 16);
r_ser_tx_strobe <= '1';
end if;
if r_ctl_state = "1010" and r_ser_tx_strobe = '0' and r_ser_tx_busy = '0' then
r_ctl_state <= "1011";
r_ser_tx_byte <= std_logic_vector(r_tst_out_sin(31 downto 24))
r_ser_tx_byte <= r_tst_out_sin(31 downto 24);
r_ser_tx_strobe <= '1';
end if;
if r_ctl_state = "1011" and r_ser_tx_strobe = '0' and r_ser_tx_busy = '0' then
r_ctl_state <= "1100";
r_ser_tx_byte <= std_logic_vector(r_tst_out_cos(7 downto 0))
r_ser_tx_byte <= r_tst_out_cos(7 downto 0);
r_ser_tx_strobe <= '1';
end if;
if r_ctl_state = "1100" and r_ser_tx_strobe = '0' and r_ser_tx_busy = '0' then
r_ctl_state <= "1101";
r_ser_tx_byte <= std_logic_vector(r_tst_out_cos(15 downto 8))
r_ser_tx_byte <= r_tst_out_cos(15 downto 8);
r_ser_tx_strobe <= '1';
end if;
if r_ctl_state = "1101" and r_ser_tx_strobe = '0' and r_ser_tx_busy = '0' then
r_ctl_state <= "1110";
r_ser_tx_byte <= std_logic_vector(r_tst_out_cos(23 downto 15))
r_ser_tx_byte <= r_tst_out_cos(23 downto 16);
r_ser_tx_strobe <= '1';
end if;
if r_ctl_state = "1110" and r_ser_tx_strobe = '0' and r_ser_tx_busy = '0' then
r_ctl_state <= "0000";
r_ser_tx_byte <= std_logic_vector(r_tst_out_cos(31 downto 24))
r_ser_tx_byte <= r_tst_out_cos(31 downto 24);
r_ser_tx_strobe <= '1';
end if;
@ -302,9 +302,9 @@ begin
-- Deglitch filter.
r_ser_rx_glitch <= r_ser_rx_glitch(6 downto 0) & ser_rx;
if r_ser_rx_glitch(7 downto 1) = "0000000" then
r_ser_rxbit <= '0';
r_ser_rx_bit <= '0';
elsif r_ser_rx_glitch(7 downto 1) = "1111111" then
r_ser_rxbit <= '1';
r_ser_rx_bit <= '1';
end if;
-- Bit timer.
@ -325,7 +325,7 @@ begin
-- Wait for start of byte.
r_ser_rx_shift(7 downto 0) <= (others => '0');
r_ser_rx_shift(8) <= '1';
r_ser_rx_timer <= to_unsigned(serial_bitrate_divider / 2 - 2, 13);
r_ser_rx_timer <= to_unsigned(serial_bitrate_divider / 2 - 2, r_ser_rx_timer'length);
r_ser_rx_timeout <= '0';
if r_ser_rx_bit = '0' then
r_ser_rx_state <= "10";
@ -346,7 +346,7 @@ begin
end if;
r_ser_rx_state <= "11";
end if;
r_ser_rx_timer <= to_unsigned(serial_bitrate_divider - 2);
r_ser_rx_timer <= to_unsigned(serial_bitrate_divider - 2, r_ser_rx_timer'length);
end if;
else
-- Invalid state.
@ -382,7 +382,7 @@ begin
if r_ser_tx_busy = '0' then
-- Wait for start of byte.
r_ser_tx_timer <= to_unsigned(serial_bitrate_divider - 2, 13);
r_ser_tx_timer <= to_unsigned(serial_bitrate_divider - 2, r_ser_tx_timer'length);
r_ser_tx_timeout <= '0';
r_ser_tx_shift <= r_ser_tx_byte;
r_ser_tx_bitcnt <= to_unsigned(9, 4);
@ -392,13 +392,13 @@ begin
r_ser_tx_busy <= '1';
end if;
elsif r_ser_tx_busy = '1' and r_ser_tx_timout = '1' then
elsif r_ser_tx_busy = '1' and r_ser_tx_timeout = '1' then
-- Send next bit.
r_ser_tx_bit <= r_ser_tx_shift(0);
r_ser_tx_shift <= "1" & r_ser_tx_shift(7 downto 1);
r_ser_tx_bitcnt <= r_ser_tx_bitcnt - 1;
r_ser_tx_timer <= to_unsigned(serial_bitrate_divider - 2, 13);
r_ser_tx_timer <= to_unsigned(serial_bitrate_divider - 2, r_ser_tx_timer'length);
if r_ser_tx_bitcnt = 0 then
-- Just completed stop bit.
r_ser_tx_busy <= '0';